[nsp] as-path prepend question
luk at everyware.ch
Tue Sep 9 17:13:19 EDT 2003
That's what I find out too ... did anyone has a suggestion ?
At 15:27 09.09.2003, Gert Doering wrote:
>On Tue, Sep 02, 2003 at 11:09:53AM +0200, Lukas Krattiger wrote:
> > I want to prepend a path based on the source ip with two additional hops
> > and the rest with one, here the config-part as I understand
> > !
> > access-list 1 10.10.0.0 0.0.0.255
> > !
> > route-map ASprepend-OUT permit 10
> > match ip address 1
> > set as-path prepend <MYAS> <MYAS>
>I think this won't work, as "match ip address" in BGP route-maps tends
>to match the *prefix*, and not the originating router. So watch this
>USENET is *not* the non-clickable part of WWW!
>Gert Doering - Munich, Germany gert at greenie.muc.de
>fax: +49-89-35655025 gert at net.informatik.tu-muenchen.de
More information about the cisco-nsp