[nsp] PA-MC-T3 card disabled

[Thomas Renzy]

Brian,

What version of code are you running in this router, memory and flash? Also,
in which slot is this card and what else is in the router?

Thomas Renzy 
IS&T Global Network Services
VERITAS Software
Office: +650-527-4734
Mobile: +650-248-1099
Fax: +650-527-2034

"Some people drink from the fountain of knowledge, others just gargle." -
Author Robert Anthony


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] 
Sent: Thursday, September 11, 2003 4:00 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] PA-MC-T3 card disabled


I keep getting the following error messages when booting our 7204 router:

%CT3-1-INITFAIL: Slot 2 firmware init (ct3sw_pci_init (count != 
expected_count))
%PA-3-DEACTIVATED: port adapter in bay [2] powered off.

Anyone know how to diagnose or debug what's going on with this card?



thanks...

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/