[nsp] CISCO UBR7114E

[Fast Track Technologies]

Prit,

Where can I get the Cable Card from and how much would it cost?

Thanks and Regards
Sunil Gulati

----- Original Message -----
From: "Prit Patel" <worknetworld at yahoo.co.in>
To: "Blaz Zupan" <blaz at inlimbo.org>; "Scott Morris" <swm at emanon.com>;
<fast_track at vsnl.com>
Cc: <cisco-nsp at puck.nether.net>
Sent: Tuesday, September 23, 2003 10:05 AM
Subject: RE: [nsp] CISCO UBR7114E


>
> I am using cisco 7114 and 7246VXR models and in that i
> can change the ANNEX from B to A. I am not sure about
> 7114E model.I think if you  can manage to change the
> cable card then it should work.
>
> Regards
> Prit
>
>  --- Blaz Zupan <blaz at inlimbo.org> wrote: > > Unless
> something has changed in the functionality
> > of things, you can
> > > type that command in all you want, however it will
> > have no effect!
> >
> > I have to admit that I have not verified this at
> > all. But at least with other
> > vendors' equipment (Arris CMTS 1000) its supported -
> > the DOCSIS version of the
> > Arris CMTS only support DOCSIS, while the EuroDOCSIS
> > version support both
> > DOCSIS and EuroDOCSIS.
> >
> > Although this statement from the Cisco documentation
> > seems to support your
> > claims:
> >
> > > Tip: Annex B is the DOCSIS MPEG framing format
> > standard for North America,
> > > supported on the Cisco uBR7111 and Cisco uBR7114
> > routers. Annex A is the
> > > European standard, supported on the Cisco uBR7111E
> > and Cisco uBR7114E
> > > routers.
> >
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/cable/ubr7100/scg7100/scg71c
rd.htm#1021747
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at
> http://puck.nether.net/pipermail/cisco-nsp/
>
> ________________________________________________________________________
> Yahoo! India Matrimony: Find your partner online.
> Go to http://yahoo.shaadi.com