[nsp] HSRP 6500/SUP2

[Pavan Reddy]

You can use the same HSRP group on each vlan...

Each vlan will only have 2 hsrp speakers (your 2 msfc's) right?

Then no problem - HSRP group just specifies the HSRP mac.

The HSRP mac (or any mac for that matter) doesn't need to be unique across
vlans...

Pavan

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Charles Von
> Dartmooth
> Sent: Monday, September 22, 2003 4:33 PM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] HSRP 6500/SUP2
>
>
> Greetings,
>
>  I am interested in setting up HSRP with 2 6500
> SUP2-MSFC2 which provider L3 connectivity for a lan
> enviornment to the rest of the network. There are a
> few hundered VLANs setup. Given the 16 group
> limitation on the SUP2, what is the best way to set it
> up so that redudancy can be provided to each
> individual VLAN without effecting the rest of them?
> (IE I wish to shutdown 1 vlan on 1 switch, without the
> other taking over for all the rest.) How are the VLANs
> tied toghter if I use 1 group for all?
>
> TIA, Charles
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/