[nsp] CISCO PA-8T-232 Problem

[Gert Doering]

Hi,

On Wed, Sep 24, 2003 at 01:21:18PM +0530, Fast Track Technologies wrote:
> Our customer installed the PA-8T-232 in the 7206VXR, and below is the POST report. Can someone help!?
[..]
> %PA-3-REVNOTSUPPORTED: PA in slot5 (Mx serial (RS-232)) requires base h/w revision of (1.4) for this chassis

Well, the message speaks for itself, no?

You have a VXR chassis, and certain port adapters will not work in the
VXR, unless you have a recent-enough hardware revision.  It will work in a
non-VXR 7206.

See http://www.cisco.com/warp/public/770/fn3028.shtml

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de