[nsp] NPE-G1 frustration
Michael Lyngbøl
michael at lyngbol.dk
Fri Sep 26 13:16:47 EDT 2003
On 26.09.2003 12:50:46 +0000, Streiner, Justin wrote:
> I upgraded one of my 7206VXRs from an NPE-300 to an NPE-G1 back in June
> and since that time I've had to replace hardware going on three times.
> The first time Cisco sent me a replacement G1 and the second time we
> forklifted in a new router, G1, interface cards and all... This time
> around I'm pushing for all brand-spanking-new hardware, straight off the
> assembly line, as opposed to something that's been sitting in a parts
> depot for 6 months... I'm pretty much at my wit's end with this thing.
>
> The router has been resetting due to power-on, however further digging has
> shown that the reset was due to a watchdog timeout each time. They
> references DDTS bug CSCea25622, which is supposed to be resolved.
>
> Has anyone else had similar experiences with the NPE-G1 at this point?
No, we do have a bunch of NPE-G1 runnning without problems.
> Was there a rash of bad G1s that made it through quality control or
> something?
My intital guess would be so.
> Several IOS versions have been run since June. Current one is 12.1(19)E,
> which is listed as a fixed version for CSCea25622.
We're running 12.2(14)S1 and 12.2(15)T1 with out any problems.
/Michael
--
Michael Lyngbøl -- michael at lyngbol dot dk
Network Architect, AS3292 TDC, IP·backbone
More information about the cisco-nsp
mailing list