[nsp] FW: Why does'nt this config work?

[Majid Siddiq]

local pref is local to the router........you cannot set local pref on
outgoing updates.....you have to do this step on the incoming update on
router where u want to set LP 110.

regards
majid

----- Original Message -----
From: "Damien Holloway" <d.holloway at hill.com>
To: "'Cisco-Nsp" <cisco-nsp at puck.nether.net>
Sent: Tuesday, September 30, 2003 4:16 PM
Subject: [nsp] FW: Why does'nt this config work?


>
> Question that's bending my brain...
> I have applied the following config
>
> ************************************************
> router bgp xxxx
> neighbor x.x.x.x remote-as xxxx   ! iBGP peer
>  neighbor x.x.x.x default-originate
>  neighbor x.x.x.x route-map OUT out ! Set LocalPref to 110
> !
> access-list 2 permit 0.0.0.0
> !
> route-map OUT permit 5
>  match ip address 2
>  set local-preference 110
> *************************************************
>
> However the neighbor is not seeing the local pref being set, what have I
> missed?
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>