[nsp] FW: Why does'nt this config work?

Stephen J. Wilcox steve at telecomplete.co.uk
Tue Sep 30 09:37:03 EDT 2003

Lo! On Tue, 30 Sep 2003, Mark Prior did sayeth:

> Majid Siddiq wrote:
> > local pref is local to the router........you cannot set local pref on
> > outgoing updates.....you have to do this step on the incoming update on
> > router where u want to set LP 110.
> Actually local pref is local to the AS, weight is local to the router.
> To fix the problem remove the "match ip address 2" statement from the 
> route-map.

My assumption is he is trying to announce a default as the ibgp peer cannot 
handle the full routing table and he needs to filter the routes, so this wouldnt 

Of course, this would be better achieved with the default in the igp not bgp..


More information about the cisco-nsp mailing list