[nsp] Ethernet switch error messages

[Todd, Douglas M.]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Dan:

Do a sh int fast0/5 and you will see the errors (crc etc).
send it to this group and we comment I am sure.

==DMT>

- -----Original Message-----
From: Dan Salekin [mailto:dan.salekin at terago.ca]
Sent: Tuesday, September 30, 2003 12:50
To: cisco-nsp at puck.nether.net
Subject: [nsp] Ethernet switch error messages


Does anybody know the condition that must be met for the following
error message to be logged in a 2924 switch:

%LINK-4-ERROR: FastEthernet0/5 is experiencing errors

The software rev is 12.0(5.1)XW

I'm looking for a technical answer.

The Cisco TAC technical answer indicated that "a lot" of errors
received may trigger the message!

I'm looking for a little more detail.

thanks,
Dan


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.8 for non-commercial use <http://www.pgp.com>

iQA/AwUBP3m20dMQXo/UaZEGEQL+3wCgkcC/2AcN2SarowRks25Zffc7s3YAn3b1
mdHVpACA3kPT3OzswJSVRVgY
=jc02
-----END PGP SIGNATURE-----