[nsp] FW: Why doesn't this config work?

[Hudson Delbert J Contr 61 CS/SCBN]

damien,

	local pref needs to be on inbound traffic from another
	iBGP speaker. the outbound traffic wont work.
	the pref is significant locally only.

~v/r
del hudson
x3-0182
delbert.hudson at losangeles.af.mil



-----Original Message-----
From: Damien Holloway [mailto:d.holloway at hill.com]
Sent: Tuesday, September 30, 2003 4:17 AM
To: 'Cisco-Nsp
Subject: [nsp] FW: Why doesn't this config work?



Question that's bending my brain...
I have applied the following config

************************************************
router bgp xxxx
neighbor x.x.x.x remote-as xxxx   		! iBGP peer
 neighbor x.x.x.x default-originate
 neighbor x.x.x.x route-map OUT out		! Set LocalPref to 110
!
access-list 2 permit 0.0.0.0
!
route-map OUT permit 5
 match ip address 2
 set local-preference 110
*************************************************

However the neighbor is not seeing the local pref being set, what have I
missed?




_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/