[nsp] High CPU question

[Bob Snyder]

On Sun, Apr 25, 2004 at 10:33:32AM -0700, Bryan wrote:
> I have a customer that is running the following config:
> 7206-nonvxr
> npe-225 w/ 256mb ram
> I/O-FE
> 5x PA-Fe-TX interfaces.
> IOS 12.2.21b

Note this is a "unsupported" configuration, since you have 6 high speed
interfaces, and the NPE-225 only supports 3 according to
http://www.cisco.com/en/US/products/hw/modules/ps2033/products_configuration_guide_chapter09186a008014cf5c.html#22289
The TAC can refuse to troubleshoot anomalies based on this. I've seen
flakey issues with VXRs that had one side over the bandwidth points
limit that were resolved by shifting interfaces.

Bob