[nsp] bgp/ospf interview questions ?

[Gould, Aaron M (NRSW N61CR1W)]

don't you also have to "send-community" to that neighbor you want to convey
no-exports to?  

it's been a while since i've done this.

aaron


Aaron Gould (CACI)
Network Engineer, PACSW/CNRSW/RITSC
619-545-2569
619-981-4900 cell
<><


-----Original Message-----
From: joshua sahala [mailto:jejs at sahala.org]
Sent: Thursday, April 29, 2004 7:55 AM
To: lee.e.rian at census.gov
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] bgp/ospf interview questions ?


On (29/04/04 10:38), lee.e.rian at census.gov wrote:
> 
> Drat!  got 'em all except for
> 
> 1) Configure Router1 to tell Router2 to not pass the routes learned from
> Router1 to any other BGP networks.
> 
> How do you do that?
> 
> Lee
> 

access-list 2 permit 172.16.3.0 0.0.0.127

route-map ad-to-r2 permit 10
match ip address 2
set community no-export

/joshua
-- 
A common mistake that people make when trying to design something 
completely foolproof is to underestimate the ingenuity of complete
fools.
	- Douglas Adams -

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/