[c-nsp] ATA-186 H.323 configuration

[Voll, Scott]

Here is the link to the software, but you will need a CCO login.

http://www.cisco.com/cgi-bin/tablebuild.pl/ata186

This is how to do it

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administr
ation_guide_chapter09186a00800c4b8d.html

Scott

-----Original Message-----
From: Onur Karaagaoglu [mailto:karaagaoglu at meteksan.net.tr] 
Sent: Tuesday, August 03, 2004 3:28 AM
To: Alexey G Misurenko
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] ATA-186 H.323 configuration


> 
> 
> Hi,
> 
> You must change software at your ATA186.
> 
> 

Hi,
Which software should I use for that purpose?

Moreover, please inform me how to obtain the software and how to install

it onto the ATA device

-- 
K. Onur KARAAGAOGLU
Internet Systems Engineer
Meteksan NET

e-mail  :    karaagaoglu at meteksan.net.tr
Tel	:   +90-312-297-9181
Mobile	:   +90-533-275-8492
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/