[c-nsp] Problems manipulating rapid spanning tree

[Niels Bakker]

* sam_ml at spacething.org (Sam Stickland) [Thu 05 Aug 2004, 14:06 CEST]:
[..]
> Switch A is the primary root of the spanning tree domain for vlan 218. 
> Switches C and D are access switches and have uplinkfast enabled.

I don't think you should do that for ports that have switches behind
them.  If you want lower convergence times try RSTP.


	-- Niels (happily retyping "no spanning-tree" on his switches)

--