[c-nsp] CBWFQ support on dialer interfaces

[Marcel Lammerse]

Great, thanks for the advice, both.

On Aug 5, 2004, at 3:30 PM, Rodney Dunn wrote:

> On Thu, Aug 05, 2004 at 02:47:05PM +0200, lammerse at xs4all.nl wrote:
>> Hi,
>>
>> I need to run cbwfq on dialer interfaces, but I can't seem to find  
>> out the
>> minimum ios requirements. Cisco's software advisor is down at the  
>> moment.
>> Which one do I need?
>
> I would go with the latest 12.3 mainline code to avoid:
>
> CSCdw91605
> Externally found moderate defect: Resolved (R)
> Dialer output queue wedge by CBWFQ
>
>
> http://www.cisco.com/en/US/partner/tech/tk543/tk544/ 
> technologies_tech_note09186a0080094ad2.shtml
>
>
>>
>> Also, any positive or negative experiences with this kind of setup?
>
> One gotcha I have seen is when you need MLPPP or not for this
> to work in a PPPoX setup.  I'm pretty sure that was just for PPPoA.
>
> For normal dial you don't have to have it.
>
> Rodney
>
>
>
>>
>> Marcel
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
---
"..the price to pay for teenage sex is pretty high--
unwanted pregnancy, disease, and ending up with one ear
bigger than the rest because it's always cocked toward
the door in case the parents come home early."
										- Michael Moore