[c-nsp] OC-3 interface for 7200...

[Matthew Crocker]

I googled for 'Fast Ethernet over OC-3'  and the 2nd link was this

http://www.rad.com/Article/0,6583,17860,00.html

google is your friend.

-Matt

On Aug 6, 2004, at 11:17 PM, Chris Hale wrote:

> What kind of OC-3 multi-mode interfaces do they make for the 7200 
> series?
> Is the most popular PA the Packet over SONET/SDH Port Adapter?
>
> We're looking to do clear channel OC-3 circuits.  Is the 7200 the best
> platform for this (within reasonable cost)?  Are there cheaper 
> platforms out
> there?  We're looking to extend 100Mbps Cogent circuits to customer
> buildings, helping Cogent extend their building reach.  But, our 
> cheaper
> radios are OC-3 only, so we'll need to take a 100Mbps FE feed from 
> Cogent,
> convert to OC-3 for the radio hop then back to 100Mbps FE for the 
> customer
> distribution within the building.
>
> Any better way to accomplish this?
>
> Thanks,
> Chris
>
> ----------------------------------------------
> Chris Hale
> Peak Networks, Inc.
> http://www.peaknetworks.com
> 800-PEAK-987
> chris at peaknetworks.com
> Motorola ACSP, Alvarion AIR, Certified Orthogon, Redline, Cisco, 
> Terabeam
> Partners.
>
>  
>  
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>