[c-nsp] strange Wic-2T behoviour

[Pal, Laszlo]

Thank you. So there is no real speed restriction using in Cisco17xx. Anyone experienced the another problem I have written in this mail or should I open a TAC case?

Thank you


Pál, László
EDS ITO
Enterprise Network Management
Tel.: +36.1.347.5544
Fax.: +36.1.347.5547
Mob.: +36.30.445.0049
E-mail: laszlo.pal at eds.com

 

> -----Original Message-----
> From: andy harding [mailto:andyh at verio.net] 
> Sent: 2004. augusztus 6. 17:18
> To: Pal, Laszlo
> Subject: Re: [c-nsp] strange Wic-2T behoviour
> 
> Pal, Laszlo wrote:
> 
> > At two location we expereince the following problem. When 
> we connect 
> > our 2 Mbit leased line to Wic-2T serial 0 it is not 
> working, but if we 
> > use serial
> > 1 port of the same interface it is fine. This is a bug or a 
> feature? 
> > Also I heard the maximum bandiwtdh of this interface is 3 
> MBit, so I 
> > cannot use 2x2Mbit on this card. Is this true?
> 
> http://www.cisco.com/en/US/products/hw/modules/ps3129/products
> _tech_note09186a00800b0858.shtml#features
>