[c-nsp] Cisco 2950 LRE switches

[Sean Mathias]

You can use an LRE switch on one and and LRE CPE on the other with a dry
pair (usually used for alarms, and pricey compared to an analog line).
But as mentioned, you are still limited to ~1 mile. 


Sean Mathias
CCIE #12779
206-920-0301
seanm at prosolve.com

-----Original Message-----
From: Matthew Crocker [mailto:matthew at crocker.com] 
Sent: Tuesday, August 10, 2004 8:32 AM
To: Cisco Nsp
Subject: [c-nsp] Cisco 2950 LRE switches



Hello,

  Does anyone have any experience with the Cisco LRE product line?   Do 
you know if these can be used in a Verizon CO and combined with UNE DSL
conditioned loops to provide LRE over the PSTN?  I'm looking at buying a
couple to extend our metro ethernet inside some buildings. It would be
great if I could use one in the CO to flip my DSL customers onto.  I
can't find anything on the Cisco website that says it will work in a
Telco environment.

Thanks

-Matt

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/