[c-nsp] AS5300 + RADIUS - IP Address Assignment

[Mark Tinka]

On Thursday 12 August 2004 09:33, Eric Knudson wrote:
> I would think that you could use RPM/Modem Pooling to easily control
> address assignment for the 2 pools of users, then policy route each
> pool(based off of source address) to a different upstream. This would
> require that you get multiple DNISes for each PRI/CAS trunk, but that
> shouldn't be too expensive.

As I'd earlier mentioned to Ryan, cisco-avpair = "ip:addr-pool=<name>" is the 
solution.

Thanks all for your responses.

Mark.