[c-nsp] AS5300 + RADIUS - IP Address Assignment

[Oliver Boehmer (oboehmer)]

> You can push back a VRF to put the resulting virtual-access interface
> into as an av-pair too.  In fact you ought to be able to push back
> any config commands you like for the virtual-access interface with
> "lcp:interface-config=blah", so I'd guess you could go down the PBR
> route too.  VRF is nicer if the AS5300 supports it though.

It doesn't support it (nor do the other AS5xxx access servers).. it will
work, but use it your own risk..

> Note: I've deployed the lcp:interface-config from av-pairs on a 7200
> terminating L2TP calls, but not on AS5300 terminating dial calls
> directly. YMMV.

Ack, this is the recommended and supported way to terminate dial calls
into VRFs.

	oli