[c-nsp] Known issues with 1721 and WIC-1T?

[Eric Whitehill]

G'day:

Currently, I have a C1721 and a WIC-1T card installed.  When I have the 
WIC-1T card installed, the router will reboot sporadically, only 
allowing about 30 seconds to 1 minutes before either locking up hard and 
needing a power cycle or rebooting.

Now, I am getting the following upon powerup.

System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.

Bad RAM at location 0x00000040: wrote 0x00000040, read 0x000000õ
System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.

*** Warning during size main memory test,
expected bus error does not occur above 32 mb of main memory

*** Alignment Error Exception ***
PC = 0x0, Vector = 0x600, SP = 0xff002430

System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.

*** Warning during size main memory test,
expected bus error does not occur above 32 mb of main memory

*** Alignment Error Exception ***
PC = 0x0, Vector = 0x600, SP = 0xff002430

Rinse, Repeat.

Anyone have ideas?  I'm kind of short here.  I'm thinking the WIC is 
bad, or the router got hit by lightning and fried itself.   Google or 
the Cisco website hasn't seem to reveal anything useful to me. 

Thanks,

-Eric

-- 
Eric Whitehill - 44.58.39N, 93.15.56W
702 Communications - ewhitehill at 702com.net - ASN15267
"Out the Gig-E, through the router, down the OC-12's, over the leased line, off the bridge, past the firewall...nothing but Net."