[c-nsp] NAT port map question

[Marcel Lammerse]

Hi,

is there any way to configure a Cisco so that every port on an outside 
address is mapped to the corresponding port on an inside address?

I.e.

213.84.22.161 TCP 1 -> 192.168.1.1 TCP 1
213.84.22.161 TCP 2 -> 192.168.1.1 TCP 2
213.84.22.161 TCP 3 -> 192.168.1.1 TCP 3
..
213.84.22.161 TCP 65535 -> 192.168.1.1 TCP 65535

Please don't tell me I have to enter 65535 static port translations to 
get this to work...

Regards,
Marcel