[c-nsp] CWDM GBICs in Cat 6509?

[Deepak Jain]

Second part of your question is that as long as you can do an 
err-disable, you should be fine with third party GBICs in the 6500. 
5000s I don't even think have the vendor specific code. I could be wrong.

Deepak Jain wrote:

> 
> MRV sells a full range of colors of GBICs I think.
> DJ
> 
> Alex Rubenstein wrote:
> 
>> I am looking for any feedback, regarding compatibility of third-party 
>> CWDM
>> GBIC's in Catalyst 6509 or 5000 switches.
>>
>> So far, I've looked at vendors like Finisar (but they only have two 
>> colors
>> at this time) and Fiberdyne (they aren't aware of anyone using 6500's).
>>
>> Any input would be appreciated.
>>
>>
>>
>> -- Alex Rubenstein, AR97, K2AHR, alex at nac.net, latency, Al Reuben --
>> --    Net Access Corporation, 800-NET-ME-36, http://www.nac.net   --
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>