[c-nsp] OSPF Route

[Annu Roopa]

Robert,
 
If u are saying one is defualt and one is Inter-area then it will check to see if the router has a inter-area route for the Dest prefix and if does it will use the inter-area route else the Defualt route.
 
If there are 2 inter area routes from same ABR the way i remember it is,  the the route which is having lower intra-area cost to ABR would be used.
 
U could have sub optimal routing in such cases. 
 
Hope i have got ur Q right.
 
Annu.

Robert Crowe <rwcrowe at comcast.net> wrote:
Given this situation what would be the determining factor on what route to
use:



A router inside and area is receiving routes from 2 ABR's, equal cost and
installing them in the route table. This includes inter-area and default
routes. What would be the determining factor on which one to use? Lowest
RID? Interface switching method ?



rwcrowe at comcast.net



_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

		
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!