[c-nsp] BGP Balanced

[Alexandra Alvarado]

Thanks very much to all!!

I've tested "load balanced" with loopback but it is only "load sharing",
after I configured cef and after MLPPP "load balanced" both , cef and mlpp,
works fine.  Now I am using MLPPP.

Thanks

Alexandra Alvarado

----- Original Message ----- 
From: "Bruce Pinsky" <bep at whack.org>
To: "Alexandra Alvarado" <aaaa at telconet.net>
Cc: <cisco-nsp at puck.nether.net>
Sent: Tuesday, August 24, 2004 12:12 AM
Subject: Re: [c-nsp] BGP Balanced


> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Alexandra Alvarado wrote:
>
> | Hello,
> |
> | I have 3 E1s with my ISP, I need to balance the traffic between this
> interfaces with BGP. How can
> | I configure that?
> |
> |
>
> Either BGP Multipath (depending on version and configuration) or via
> multi-hop sharing.  See the examples at:
>
>
http://www.cisco.com/en/US/tech/tk365/tk80/technologies_configuration_example09186a00800945bf.shtml
>
> - --
> =========
> bep
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.2 (MingW32)
>
> iD8DBQFBKs4zE1XcgMgrtyYRAs5tAJ9SfZ38gx0rmemOiB30As1H6qedwgCfeQ3f
> 54X5dmxeqZhFoj/jzLcKv0c=
> =ng61
> -----END PGP SIGNATURE-----