[c-nsp] Problem with "username xxx privilege 15"

[Bob Tinkelman]

I tried to set up a username with "privilege 15" for the first time
recently, after upgrading some of our routers from 12.2 to 12.3.

I must be doing something wrong; hopefully it's obvious.

Any advice would be appreciated.

| gw1.nycmnybs#config term
| Enter configuration commands, one per line.  End with CNTL/Z.
| gw1.nycmnybs(config)#username test15 privilege 15 secret test15
| gw1.nycmnybs(config)#^Z
| gw1.nycmnybs#
| gw1.nycmnybs#sho run int l0 | inc ip addr
|  ip address 199.224.0.245 255.255.255.255
| gw1.nycmnybs#
| gw1.nycmnybs#telnet 199.224.0.245
| Trying 199.224.0.245 ... Open
| 
| 
| User Access Verification
| 
| Username: test15
| Password: 
| 
| gw1.nycmnybs>sho priv
| Current privilege level is 1
| gw1.nycmnybs>config term
|                 ^
| % Invalid input detected at '^' marker.
| 
| gw1.nycmnybs>sho ver
| Cisco Internetwork Operating System Software 
| IOS (tm) 7200 Software (C7200-JK9O3S-M), Version 12.3(10), RELEASE SOFTWARE (fc)
| Copyright (c) 1986-2004 by cisco Systems, Inc.
| Compiled Mon 16-Aug-04 23:46 by kellythw
...

--
Bob Tinkelman <bob at tink.com>
ISPnet, Inc.    718.464.4747