[c-nsp] ITP, 7513, GEIP+

[Vladimir Sulinets]

ITP stands for "IP Transfer Point" - transport for SS#7 (Telephony
Signalling Protocol). Answer on my question is "yes, ITP supports
GEIP+" :) and this configuration is in configurator already :)


On Mon, 8 Nov 2004 09:26:22 -0500, Rodney Dunn <rodunn at cisco.com> wrote:
> On Mon, Nov 08, 2004 at 11:08:42AM +0200, Vladimir Sulinets wrote:
> > Hello,
> >
> > does anybody know, is ITP software (on 7513) works with GEIP+ adapter?
> 
> Too many acronyms.  What is ITP?
> 
> > Configurator says, that this is incompatible configuration. Is it
> > Configurator's trouble or real life? If last - how to use Gigabit
> > connection on ITP, if neither VIP4 nor VIP6 support PA-GE?
> 
> A GEIP+ is a fixed configuration VIP/PA combo.  You can't change
> it.  We do not support a PA-GE plugged in to a VIP.
> A GEIP+ is a distributed forwarding blade for the 75xx just
> like any othe VIP/PA combo so it should support any distributed
> feature.
> 
> Rodney
> 
> >
> > Thank you.
> >
> > --
> > Vladimir
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


-- 
Vladimir