[c-nsp] 2900XL and TACACS+

[Brian Feeny]

Thanks appreciate the tip


On Dec 13, 2004, at 4:45 PM, Jeff Chambers wrote:

> I would try c2900XL-h2s-mz-112.8.5-SA6.bin (notice "h2s" in the name)
>
>
>
> I know c2900XL-h2s-mz-112.8.2-SA6.bin has TACACS+ support.
>
>
> In this old code, these lines work.
>
> "aaa authentication login default tacacs+ local"
>
> "aaa authentication login default local"
>
>
>
> This line does not work.
>
> "aaa authentication login default local tacacs+"
>
>
> Jeff Chambers.
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Brian Feeny
> Sent: Tuesday, December 07, 2004 3:09 AM
> To: Marty Adkins
> Cc: 'cisco-nsp'
> Subject: Re: [c-nsp] 2900XL and TACACS+
>
>
>
> I have that code, but it doesn't look like TACACS+ is in there:
>
> amsouth-switch1#show version
> Cisco Internetwork Operating System Software
> IOS (tm) C2900XL Software (C2900XL-HS-M), Version 11.2(8.6)SA6,
> MAINTENANCE INTERIM SOFTWARE
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Fri 10-Dec-99 14:47 by cchang
> Image text-base: 0x00003000, data-base: 0x00211B54
>
> ROM: Bootstrap program is C2900XL boot loader
>
> amsouth-switch1 uptime is 6 days, 12 hours, 9 minutes
> System restarted by reload
> System image file is "flash:c2900XL-hs-mz-112.8.6-SA6.bin", booted via
>
>
> cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with
> 4096K/640K bytes of memory.
> Processor board ID 0x07, with hardware revision 0x00
> Last reset from warm-reset
>
> Processor is running Enterprise Edition Software
>
> amsouth-switch1(config)#aaa authorization network local ?
>    if-authenticated  Succeed if user has authenticated.
>    none              No authorization (always succeeds).
>    <cr>
> amsouth-switch1(config)#tac?
> % Unrecognized command
>
> I read some docs too that eluded that this version would have TACACS+,
> but it doesn't seem to be there.
>
> Brian
>
>
>
> On Nov 30, 2004, at 3:45 PM, Marty Adkins wrote:
>
>> Brian Feeny wrote:
>>> Does any IOS version allow the 2900XL (4MB) to use TACACS+?
>>> cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with
>>> 4096K/640K bytes of memory.
>>> Processor board ID 0x07, with hardware revision 0x00
>>> Last reset from warm-reset
>>> I loaded enterprise 11.2 and didn't see it, but I would suspect that
>>> surely some image supported TACACS+
>> Support for the 4MB XLs ended with the 11.2(8.x)SA6 train.  It
>> supports TACACS+
>> but not the later AAA.  It does require the enterprise edition:
>> http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35sa6/
>> eescg/mascupf.htm
>>
>> - Marty
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> ---------------------------------------------
> Brian Feeny, CCIE #8036, CISSP
> Network Engineer
> ShreveNet Inc.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/