[c-nsp] MBUS group type slot 3 unprogrammed

[Bastiaan Spandaw]

Hi list,

I have a problem with a 10GE linecard in a 12404
When I do a "sh vers", I get the message:

WARNING: MBUS group type slot 3 unprogrammed
Contact your technical support representative.


I know it says please contact a support rep, but hope someone on the
list can give me a quick answer.

Below is the full output of sh vers

Thanks in advance,

Bastiaan Spandaw



12404-AMX#sh vers
Cisco Internetwork Operating System Software
IOS (tm) GS Software (C12KPRP-K4P-M), Version 12.0(28)S, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 03-May-04 18:11 by nmasa
Image text-base: 0x00010000, data-base: 0x03BF0000

ROM: System Bootstrap, Version 12.0(20040212:135146) [sen-simple 1.13]
RELEASE SOFTWARE
BOOTLDR: GS Software (C12KPRP-K4P-M), Version 12.0(28)S, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)

  12404-AMX uptime is 18 weeks, 6 days, 3 hours, 20 minutes
Uptime for this control processor is 18 weeks, 6 days, 3 hours, 52 minutes
System returned to ROM by reload
System restarted at 15:03:23 CEST Wed Aug 4 2004
System image file is "disk0:c12kprp-k4p-mz.120-28.S.bin"

cisco 12404/PRP (MPC7450) processor (revision 0x00) with 524288K bytes
of memory.
MPC7450 CPU at 665Mhz, Rev 2.1, 256KB L2, 2048KB L3 Cache
Last reset from power-on

1 Route Processor Card
1 Clock Scheduler Card
1 Ten Port Gigabit Ethernet/IEEE 802.3z controller (10 GigabitEthernet).
2 Ethernet/IEEE 802.3 interface(s)
10 GigabitEthernet/IEEE 802.3 interface(s)
2043K bytes of non-volatile configuration memory.

62720K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102

WARNING: MBUS group type slot 3 unprogrammed
Contact your technical support representative.