[c-nsp] Terminal Emulator

[Earls, Michael]

SecureCRT for all connections

http://www.vandyke.com/products/securecrt

Michael 

PGP Info: KeyID 0x0DFD993C
Fingerprint F903 0325 5105 2CDB 4BF4 C88B 72F7 BA7A 28CC 598A 


-----Original Message-----
From: Rieman, Jeffrey [mailto:j-rieman at onu.edu]
Sent: Tuesday, December 14, 2004 2:08 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Terminal Emulator


Was wondering what terminal emulator everyone uses to connect to their
switches and access points?  I used to use HyperTerm but that seems to
be getting even less reliable and user friendly.  

 

Thanks!

 

Jeff

 

---

Jeff Rieman

Network Manager

Ohio Northern University

(419) 772-2497

j-rieman at onu.edu

 

"The ultimate measure of a man is not where 

he stands in moments of comfort and convenience, 

but where he stands at times of challenge and controversy."
                   -Dr. Martin Luther King Jr. 

 

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


This e-mail transmission contains information that is confidential and may be privileged.   It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated.