[c-nsp] Advertising private network in iBGP

[Prit Patel]

hello all

I m trying to advertise ip block 10.12.5.0/24 & 10.12.9.0/24 in my BGP
session but it is not getting advertise.

Following is the config of router
Platform == 7204 with NPE-400
IOS == c7200-p-mz.122-18.S.bin

router bgp 100
network 10.12.5.0
neighbor 2.2.2.2 prefix-list go-out out

ip route 10.12.5.0 255.255.255.0 1.1.1.1

ip prefix-list go-out permit 10.12.5.0/24

But the network 10.12.5.0 is not appering in my advertised routes on
this router.

Is there any special command required to enable this.

Regards
Prit