[c-nsp] How to Determine the Serial Number of Catalyst

[Wojtek Zlobicki]

This link should provide you with what you need (this is acutally a
very good link that is good for newcomers that are unfamiliar with the
architecture of the platform):

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801c1e9a.shtml#cat6k


On Sun, 19 Dec 2004 11:38:49 -0500, Wojtek Zlobicki
<wojtek.zlobicki at gmail.com> wrote:
> Boris,
> 
> What software are you running?   With regards to the GBIC,  many of
> the ones I have deployed do not have serial numbers (try to explain
> this to TAC)
> 
> On Fri, 17 Dec 2004 17:43:23 -0300, Bequer Puentes, Boris Hernán
> <bbequer at manquehue.cl> wrote:
> >
> > Anyone know How to Determine the Serial Number of Catalyst Switch:  (5500,
> > 6509)
> >
> > GBIC
> > POWERSUPPLY
> >
> > show diagbus is not supported
> > show idprom is not supported
> > Appreciate any help
> >
> > Boris
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> 
> 
> --
> ----------------------------------------
> wojtek.zlobicki at gmail.com
> 


-- 
----------------------------------------
wojtek.zlobicki at gmail.com