[c-nsp] Giga EthernetChannel

[Tantsura, Jeff]

You will configure HSRP on PortChannel interface.

Jeff


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of M.Palis
Sent: Monday, December 20, 2004 12:37 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Giga EthernetChannel


Hello all

I am considering of configuring GigaEthercahnnel between 2 GEIP+ on a
cisco
7513 and a 3550 cisco switch. Are their any issues concerning this
configuration? The reason I want to do it is as a temporary solution to
overcome some performance limitation of GEIP throughput. (See my
previous post regarding GEIP+ high CPU).

One of my concerns is HSRP which  it is know configured on one of the
GEIPs.. Do  I have to configure the same HSRP config on the other GEIP?
Will this configuration work?

Thanks for your support.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient,  you are not authorized to read, print, retain, copy, disseminate,  distribute, or use this message or any part thereof. If you receive this  message in error, please notify the sender immediately and delete all  copies of this message.