[c-nsp] Joining several STM1's to a GigE using ONS 15305

[Neil J. McRae]

Not sure on the 15305 but on the 15454 you can do this.
Look for VCAT and LCAS support You should be able to bind the
two VC4's in the STM-1 to a single channel that you can run GFP
over and then the gige should be able to work over those.

Neil.

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Arie Vayner
> Sent: 23 December 2004 08:47
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Joining several STM1's to a GigE using ONS 15305
> 
> Hi All,
>  
> I am looking for a solution to join several STM1's into a 
> single GigE port.
> The application is quite simple - I have several POS STM1 
> links between
> 2 locations, and I would like to "join" them together, while 
> using a single GigE port on both sides transparently.
>  
> One of the solutions that has been suggested was to use the 
> ONS 15305, but I could not find how to implement this 
> application on the ONS. The only thing I found is the option 
> to bind an Ethernet port to a single
> STM1 or STM4.
>  
> Anybody does that? Anybody knows another product that can do it?
>  
> Arie Vayner
> CCIE #12198
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>