[nsp] error message when doing rcp to running-config

[Jochen Kaiser]

Hi,

when configuring a router remotely via:

rcp <FILE WITH STATEMENTS> $ROUTER:running-config

I get the following effects:
1. the router is configured as it should be.
2. I get an error message as follows in the logfile:

Feb  3 23:01:54 router 70: Feb  3 23:01:54.665 MET: %PARSER-4-BADCFG: Unexpected end of configuration file.
Feb  3 23:01:54 router 71: 
Feb  3 23:01:55 router 72: Feb  3 23:01:54.669 MET: %SYS-5-CONFIG_I: Configured from rcp://jk@host/richtig by console

The message appears on a wide range of different cisco architectures.
-what is wrong with my file?

regards,
Jochen
-- 
Dipl. Inf. Jochen Kaiser, GPG 0x3C93A870, phone +49 9131 85-28681
Network Administration  mailto:jochen.kaiser at rrze.uni-erlangen.de
Regionales Rechenzentrum Universitaet Erlangen-Nuernberg, Germany
Homepage and PublicKey: http://ipv6.rrze.uni-erlangen.de/~unrz111