[Fwd: Re[2]: [nsp] 6509 + MFSC2 + CAR ?]

[Ian Cox]

At 01:30 AM 2/6/2004 -0800, Benjie Ko wrote:
>Question (pardon me please for my ignorance) with
>regards to below. I have sup2/msfc2
>If I have the ff: setup
>
>internet <-GE->6509<--GE isl
>trunk-->3548<-FE->customer VLAN
>
>If I apply the policy config on the vlan interface
>instead of the physical interface on the 6509, w/c
>would be policed,
>traffic coming into the 6509 from my uplink or traffic
>from customer into 6509?

Yes, as long as the ports are set to "vlan mode" for qos via the "mls qos 
vlan-based" command on the physical ports. If the ports are set to port 
mode then they will take the configuration for qos from the physical port.


Ian

>Thanks
>
>
>
> >
> > #2 Sup2 only supports input policing. Configure this
> > feature though the
> > modular qos cli (MQC) like this:
> >
> > class a1
> >    match access-group 100
> > policy-map test
> >    class a1
> >       police 10000000 312500 312500 conform-action
> > transmit exceed-action drop
> >
> > int fast 3/1
> >    service-poicy input test
> >
>
>
>
>
>
>
>__________________________________
>Do you Yahoo!?
>Yahoo! Finance: Get your refund fast by filing online.
>http://taxes.yahoo.com/filing.html
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/