[nsp] NPE-G1 in "old" VXR-chassis

[Jared Mauch]

	I have tried to put one in a non-VXR chassis (just for fun)
and it did not work.  Upon powering up the power supplies just
shut themselves off.  (within about 1 second or so).

	- Jared

On Thu, Feb 12, 2004 at 12:14:33PM +0100, Ernest Altbart wrote:
> Hi,
> 
> has anyone ever exchanged an NPE 225/300/400 for a new NPE-G1 in an
> "old" VXR chassis and/or has encountered any issues with that ? Or in
> other words: Will an NPE-G1 work in first generation VXR chassis ?
> 
> >From the docs I am inclined to guess "no problem", but I rather
> interested in first hand experience.
> 
> Any input welcome
> 
> Ernest
> 
> Ernest Altbart           Manager Network Engineering
> Nextra Telekom GmbH             http://www.nextra.at
> Nussdorferlaende 23          A-1190 Vienna / Austria
> Tel: +43/1/525 33-1300        Fax: +43/1/525 33-3300
> see Disclaimer        http://www.nextra.at/signatur/
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.