[nsp] Rate Limit Problem.
Church, Chuck
cchurch at wamnetgov.com
Thu Feb 26 09:01:14 EST 2004
Combining the rate limiting with a time-based ACL might do it.
Chuck Church
Lead Design Engineer
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 703-819-3495
cchurch at wamnetgov.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=index&search=cchurch%40wamnetgov.com
> -----Original Message-----
> From: Mahesh S [mailto:mahesh_s at stpb.soft.net]
> Sent: Thursday, February 26, 2004 3:54 AM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] Rate Limit Problem.
>
>
> Hi All,
>
> I need to know is there any way of restricting the customer
> b/w dynamically,
> the problem we are facing is if we restrict the port speed to
> 1 Mbps using
> Rate
> limit on a 2 Mbps port, the traffic will not increase beyond
> 1 Mbps at all
> times.
>
> I need to know is there any method to provide the full 2Mbps
> speed at some
> time
> & restrict to 1 Mbps at some pre defined time.
>
> rgds
> Mahesh.S
>
>
More information about the cisco-nsp
mailing list