[nsp] Cisco 7206 NONVXR reloading

[Srdjan Simic]

   Hello all,

   We have two Cisco 7206 NON VXR with NPE 200. One of them if reloading every couple of days. We switched power supply, cable, power supply slot and still it is the same. The message is that the system reloaded from power-on. Both of those routers are on UPS (Smart APC). Here is output from show ver:

Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(15)T7,  RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 08-Aug-03 20:39 by ccai
Image text-base: 0x60008954, data-base: 0x61BF2000

ROM: System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(5)T1,  RELEASE SOFTWARE (fc1)

Core7206 uptime is 17 hours, 33 minutes
System returned to ROM by power-on
System restarted at 16:05:03 CET Wed Jan 7 2004
Running default software

cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.
Processor board ID 11058484
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
6 slot midplane, Version 1.3

Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
125K bytes of non-volatile configuration memory.
4096K bytes of packet SRAM memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102

   Best regards
   Srdjan

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.556 / Virus Database: 348 - Release Date: 26/12/2003