[nsp] AUX in Router 1721

Fri Jan 9 07:38:07 EST 2004

I do what you tell me and nothing happened, with debugging modem,chat
and dialer on, I do a ping, and any messages of events occurs.

Here the complete configuration of the Router:

dt-zanja#sho conf
Using 4066 out of 29688 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname dt-zanja
!
enable secret 5 $1$Krk5$owON5io9PkybzmoF8Sx450
enable password system
!
username sm201 password 0 cimex
memory-size iomem 25
clock timezone EST -5
ip subnet-zero
no ip domain-lookup
ip domain-name cimex.com.cu
!
chat-script Dialout ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT
45 CONNc
!
!
!
interface FastEthernet0
 ip address 172.17.3.62 255.255.255.224
 ip access-group 103 in
 speed auto
!         
interface Serial0
 description Puerta Frame-Relay a 64K
 bandwidth 64
 no ip address
 encapsulation frame-relay
 ip policy route-map cimex
 no fair-queue
!         
interface Serial0.1 point-to-point
 description Enlace Frame-Relay con el Sierra Maestra
 backup delay 2 60
 backup interface Dialer10
 ip address 172.18.4.90 255.255.255.252
 ip ospf message-digest-key 1 md5 DBlinn
 ip ospf cost 300
 ip policy route-map cimex
 frame-relay interface-dlci 63   
!         
interface Async5
 no ip address
 encapsulation ppp
 dialer in-band
 dialer pool-member 20
 async default routing
 async mode dedicated
 ppp authentication chap
!         
interface Dialer10
 description Enlace de respaldo Async
 ip address 172.18.5.23 255.255.255.0
 encapsulation ppp
 dialer pool 20
 dialer remote-name sm201
 dialer idle-timeout 300
 dialer string 12048360
 dialer-group 1
 no cdp enable
 ppp authentication chap
!         
router ospf 1600
 log-adjacency-changes
 no auto-cost
 area 0 authentication message-digest
 area 172.17.3.224 authentication message-digest
 area 172.17.3.224 stub no-summary
 redistribute connected subnets
 passive-interface Dialer10
 passive-interface FastEthernet0
 network 172.17.3.32 0.0.0.31 area 172.17.3.32
 network 172.18.4.88 0.0.0.3 area 172.17.3.32
 maximum-paths 2
!         
ip classless
ip route 0.0.0.0 0.0.0.0 172.18.5.200 130 permanent
no ip http server
!         
!         
access-list 1300 permit 172.16.1.60
access-list 1301 deny   any
access-list 103 permit ip 172.16.0.0 0.15.255.255 172.16.0.0
0.15.255.255
access-list 103 permit tcp 172.16.0.0 0.15.255.255 any eq 1863
access-list 103 permit ip 172.16.0.0 0.15.255.255 192.9.12.0 0.0.0.255
access-list 105 permit udp any range 5000 5007 any range 5000 5007
access-list 105 permit udp any range 16384 32276 any range 16384 32276
access-list 105 permit udp any any precedence critical
access-list 106 permit tcp any eq 3264 any
access-list 106 permit tcp any eq 33 any
access-list 106 permit tcp any any eq 3264
access-list 106 permit tcp any any eq 33
access-list 107 permit tcp any eq 1352 any
access-list 107 permit tcp any any eq 1352
access-list 108 permit tcp any range 1719 1720 any
access-list 108 permit tcp any any range 1719 1720
access-list 109 permit tcp any eq telnet any
access-list 109 permit tcp any any eq telnet
access-list 110 permit tcp any eq 3264 any
access-list 110 permit tcp any eq 33 any
access-list 110 permit tcp any any eq 3264
access-list 110 permit tcp any any eq 33
access-list 110 permit tcp any eq telnet any
access-list 110 permit tcp any any eq telnet
access-list 110 permit icmp any any
access-list 112 permit tcp any eq www any
access-list 112 permit tcp any eq 8080 any
access-list 112 permit tcp any any eq www
access-list 112 permit tcp any any eq 8080
access-list 112 permit tcp any any eq domain
access-list 112 permit tcp any eq domain any
dialer-list 1 protocol ip list 110
dialer-list 1 protocol ipx permit
route-map cimex permit 10
 match ip address 105
 set ip precedence critical
!         
route-map cimex permit 20
 match ip address 110
 set ip precedence flash-override
!         
route-map cimex permit 30
 match ip address 106 108 107 112
 set ip precedence priority
!         
route-map cimex permit 40
 set ip precedence routine
!         
snmp-server community public RO
snmp-server community saver RW 1300
snmp-server community ILMI RO 1301
!         
line con 0
line aux 0
 location Taller Electromecanica
 exec-timeout 0 0
 script dialer Dialout
 modem InOut
 transport input all
 stopbits 1
 speed 38400
 flowcontrol hardware
line vty 0 4
 password system
 login    
!         
no scheduler allocate
end       

-----Original Message-----
From: Dennis Peng [mailto:dpeng at cisco.com] 
Sent: Thursday, January 08, 2004 7:20 PM
To: DT-Eugenio Latour
Cc: bep at whack.org; cisco-nsp at puck.nether.net
Subject: Re: [nsp] AUX in Router 1721

Do you have the configuration for line aux 0 (line 5) and dialer-list
1? Try turning on "debug modem", "debug chat", "debug dialer" and then
send your ping.

Dennis