[nsp] translating the port

[Rubens Kuhl Jr.]

This stateful behaviour is not something that a stateless machine can do...
but there is a SLB module available to 6500/7600, that possibly would do
what you want.


Rubens


----- Original Message ----- 
From: <Rajeshbansal9 at aol.com>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, January 13, 2004 5:44 PM
Subject: [nsp] translating the port


> Hello,
>
> Is there any way in 7600 just to translate the destination port of a
packet.
> So if the 7600 receives a packet that is destined to port 25, have it
change
> it to something else and maintain the session entry. Sort of NAT but
maintaing
> the address but just changing the destination port.
>
> Thanks
>
> raj
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>