[nsp] Is the NM-1FE-TX supported by the 2621XM?

[Voll, Scott]

What about a vlan trunk or do you need the 3 FE for a reason you can't
use the Trunk? 

Scott

-----Original Message-----
From: Vincent De Keyzer [mailto:vincent at dekeyzer.net] 
Sent: Wednesday, January 21, 2004 2:07 AM
To: cisco-nsp at puck.nether.net
Subject: RE: [nsp] Is the NM-1FE-TX supported by the 2621XM?

Hmm... how do I get 3 FE ports on a 2621XM then?

Is it not possible? 

In which case, what platform can get 100 Mbps through (1500-bytes
packets)
and have 3 FE ports?

Vincent


> -----Original Message-----
> From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
> Sent: mardi 20 janvier 2004 17:34
> To: Vincent De Keyzer; cisco-nsp at puck.nether.net
> Subject: RE: [nsp] Is the NM-1FE-TX supported by the 2621XM?
> 
> 
> > 
> > sorry for the dummy question: is the NM-1FE-TX supported by the 
> > 2621XM? Where can I find this on CCO?
> 
> It is not supported on 2621 (or any 26xx for that matter). 
> See 
> http://www.cisco.com/en/US/products/hw/modules/ps2797/products
_module_in
stallation_guide_chapter09186a008007c8c4.html

	oli

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/