[nsp] Is the NM-1FE-TX supported by the 2621XM?

[Brian Turnbow]

from memory a 2948L3 does what you need and costs less than a router that
will provide 100Mbs throughput with 3 FE ports.


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Vincent De Keyzer
Sent: giovedi 22 gennaio 2004 12.06
To: cisco-nsp at puck.nether.net
Subject: RE: [nsp] Is the NM-1FE-TX supported by the 2621XM?


Because I need OSPF and IPX too...

V

> -----Original Message-----
> From: Brian Turnbow [mailto:b.turnbow at twt.it]
> Sent: jeudi 22 janvier 2004 11:58
> To: 'Vincent De Keyzer'; cisco-nsp at puck.nether.net
> Subject: RE: [nsp] Is the NM-1FE-TX supported by the 2621XM?
>
>
> if you need cheap 100mbs thoughput on fast ethernets ports
> only how about a cheap layer 3 switch? you'll save a ton of cash.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/