[nsp] Memory partitioning on a 7206

[Krzysztof Adamski]

On Mon, 26 Jan 2004 atticus at satanic.org wrote:

>
> On Mon, 26 Jan 2004, Dennis Peng wrote:
>
> > The "memory-size iomem" command is available on the NPE-300, NPE-400,
> > NSE-1, and NPE-G1.
>
> ...because otherwise you have dedicated packet memory, in which case
> there's no need to partition it.

Something is not adding up then,
This is the router:
cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.
this is show mem:
                Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)
Processor   622C4840    80984000    76257876     4726124       37016     3229524
      I/O    7000000    16777216     1512280    15264936    15198768    15264892
      PCI   4B000000     4194304     1058488     3135816     2811096     3135676

Processor+I/O+PCI comes to 97Megs, I'm guessing that the 31 is for the IOS

So where is the packet memory?

K