[nsp] Memory partitioning on a 7206

[Dennis Peng]

Gert Doering [gert at greenie.muc.de] wrote:
> Hi,
> 
> On Mon, Jan 26, 2004 at 09:25:21AM -0800, Dennis Peng wrote:
> > The "memory-size iomem" command is available on the NPE-300, NPE-400,
> > NSE-1, and NPE-G1.
> 
> That's news to me.

Command added in CSCdv58969 although there has been a few
"undocumented features" along the way...

> NPE-G1, 12.2(14)S3:
> 
> Cisco(config)#mem?   
> memory  
> Cisco(config)#memory ?
>   sanity  Enable memory sanity

This is probably CSCea40870. The command was missing on the NPE-G1.

> NPE-400, 12.2(18)S2:
> 
> Cisco(config)#memory ?
>   cache    Cache setting
>   free     free memory low water mark
>   reserve  reserve memory
>   sanity   Enable memory sanity

Did you try "mem?". Should work, it isn't a hidden command.

Dennis

> 
> NPE-300, 12.2(12a):
> 
> Cisco(config)#memory ?
>   cache  Cache setting
> 
> Cisco(config)#memory cache ?
>   error-recovery  Error recovery setting
>
> 
> is it a hidden command?
> 
> gert
> -- 
> Gert Doering
> Mobile communications ... right now writing from * RIPE 47 / Amsterdam *