[nsp] Ram Upgrade on Cat 6509

[Jared Mauch]

	I like memoryx.net for a reference of what the Cisco equipment
takes.

	http://www.memoryx.net/cat60ms1.html

	Try the above link for your reference..

	- jared

On Fri, Jul 02, 2004 at 02:28:03PM -0700, Voll, Scott wrote:
> I have not done an upgrade on a Cat6509 before and I'm not getting a lot
> from CCO.
> 
> On a Sup1a/msfc2 I need to upgrade RAM to 256mb.  
> 
> The Cat 6509 is running Native IOS.  And already has 128mb of Ram.
> 
> I told my AM that I needed to upgrade to 256mb and now I have
> MEM-MSFC2-128MB in my hand.  
> 
> Does the Sup1a/MSFC2 have two slots?   If it's a single slot then I need
> to return the 128 and get 256.  
> 
> Has anyone done this upgrade and can verify the RAM slots on the MSFC2?
> 
> Thanks In Advance.
> 
> Scott 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.