[nsp] Ethereal & Catalyst

[Richard Danielli]

Vincent 

try the link below... 

it talks about setting a SPAN port (Switch Port Analyzer) 

http://www.cisco.com/en/US/products/hw/switches/ps637/products_command_reference_chapter09186a008007eed6.html#xtocid2472951

On Mon, 2004-07-12 at 07:54, Vincent De Keyzer wrote:
> Hello,
>  
> I am trying to capture traffic with Ethereal, but all I get to see is what
> happens between my machine and others, plus broadcasts; and I don't see the
> traffic generated by the machine I am interested in.
>  
> I imagine it's because I am on a (Catalyst 3548) switch and not on a hub?...
> 
>  
> Can I change the config of the switch so that I can see what is going on on
> a particular port (or on all ports)?
>  
> Vincent
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
-- 
Richard Danielli <richard.danielli at esubnet.com>