[nsp] Two Routes to destination - failover

[Roy]

We do this with BGP on the primary route and static routes (at lower
priority) on the secondary route.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Monday, July 12, 2004 6:03 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] Two Routes to destination - failover


I"m looking for a simple approach to an upcoming project.

We currently have a remote site that is working fine.  For redundency we
would like to take a separate physical route to this location using wireless
and make this new connection the "primary" connection and the existing
connection a "backup" connection.

Can this be done using two route statements and metic values?  I"m looking
for a really simple solution that will push all traffic via a primary link
and fallback to the secondary link if there's a failure..

Thanks,

Paul

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/