[nsp] Rate-limit on 3550

[Nick Shah]

Hi Prit

Check:

http://www.cisco.com/warp/public/473/153.html

I have deployed policing on 3550's and it works as expected, barring the
issue with the burst (configure it high enough so that the saw tooth
effect is averaged out)

rgds
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Prit
Sent: Tuesday, 20 July 2004 2:24 PM
To: NSP List
Subject: [nsp] Rate-limit on 3550


Hello All,

How can we do rate-limit on cisco 3550 switch ?
or is there any other way to control traffic on Cisco 3550 ?

Regards
Prit
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


------------------------------------------------------------------------------
This communication, including any attachments, is confidential. If 
 you are not the intended recipient, you should not read it - please 
 contact me immediately, destroy it, and do not copy or use any part of 
 this communication or disclose anything about it.

------------------------------------------------------------------------------