[c-nsp] [Newbie question] Cisco 2620 hangs at boot time

[Clayton Kossmeyer]

Hello -

You can reset the console baud rate with the following.

Console Baud Reset Jumper:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008009433b.shtml#band_reset

Regards,

Clay

On Thu, Jul 22, 2004 at 05:51:28PM +0300, Ispas Paul wrote:
> 
> 
> 
> Hi, 
> 
> Any one can help me please.
> 
> I have a problem with a Cisco 2620. 
> It hangs at boot time and I can't enter the Rom monitor.
> Problem comes from a typo 
> "confreg 0x21002"
> instead of confreg 0x2102
> 
> 
> Thank You. 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/